We-Guard Fire Safety EquipmentsFIRE Cartridge operated Dry Powder extinguishers are characterized by their high performance, simple method of operation and rapid fire knock down capability. They are suitable for tackling fires involving freely burning materials, petrol & oils, gas & electrical equipment. They are ideal for vehicle & marine risks. KANEX powder extinguishers contain high performance powder to achieve high Fire Rating.
FEATURES
- Sodium -bi-carbonate based Dry Chemical agent capable of fighting class B, C & E fires as per IS 4308
- Mono Ammonium Phosphate based dry chemical agent capable of fighting class A, B, C and E fires as per IS 14609 (on request)
- BIS Approved ( IS 15683 )
- CE Certified (On Request)
- High quality pure polyester powder coating
- Controlled discharge
- Brass nickel plated head valve with simple squeeze operation
- Easy & more economical to maintain & service
- Rechargeable and easy to service
- Choice of capacity from 1 to 9 Kg
- High quality EPDM Rubber braided hose is far more flexible than the normal rubber used in hose pipe and also far less prone to cracks.
| PERFORMANCE DATA |
| MODEL |
WGD 4 |
WGD 6 |
WGD 9 |
| Capacity |
4 kg. |
6 kg. |
9 kg. |
| Fire Rating |
21B |
34B |
34B |
| Average discharge time |
15.0 sec |
21.0 sec |
32.0 sec |
| Height without base (Approx.) |
510 mm |
540 mm |
585 mm |
| Diameter (Approx) |
140 mm 10 mm |
150 mm 10 mm |
180 mm 10 mm |
| Filled weight (Approx.) |
7.3 Kg |
10.3 Kg |
15.3 Kg. |
| Empty weight (Approx) |
3 Kg |
4 Kg |
6.3 Kg |
| Operating temperature |
-300C to 550C |
-300C to 550C |
-300C to 550C |
| Working Pressure at 200 C |
15 bar |
15 bar |
15 bar |
| Maximum Service Pressure |
18 bar |
18 bar |
18 bar |
| Test Pressure |
35 bar |
35 bar |
35 bar |
| technical specification |
| As per IS Specification & Capacity |
: |
DCP, cap : 5kgs. & 10kgs. as per IS Spec: 2171 & higher cap. 25kgs. 50kgs. & 75kgs. as per IS Spec 10658 |
| Approval |
: |
DCP 5kgs. & 10kgs. approved & certified by BIS with ISI mark. |
| Construction |
: |
Body CRCA Sheets, IS : 513 |
| Cap |
: |
Brass forging |
| Anti- Corrosive treatment |
: |
Body Coated with epoxy powder coating / phosphatised. |
| Hydraulic test |
: |
Carried out at 30 kg/cm2 as per IS norms. |
| Charge |
: |
Dry Powder Sodium Bi-Carbonate base and Co2 gas cartridge is fixed with each extinguisher. |
| Finish |
: |
Post Office Red/Fire Red Epoxy polyester powder coated |
| Accessories |
: |
Wall mounting brackets. (Higher capacity are wheel mounted) |
| Maintenance |
: |
The fire extinguisher must be maintained as per IS :2190 for satisfactory performance. |
| Operation |
: |
Keep the KANEX extinguisher upright. Remove the safety clip & strike the knob. Direct discharge to fall on the base of the fire. |
| DCP EXTINGUISHERS ARE ALSO AVAILABLE IN SQUEEZE GRIP TYPE. |